home *** CD-ROM | disk | FTP | other *** search
/ Collection of Tools & Utilities / Collection of Tools and Utilities.iso / print / mprint40.zip / CONFIGMP.DOC < prev    next >
Text File  |  1989-01-09  |  4KB  |  87 lines

  1.  
  2.  
  3.                   Multi-Print v4.0 Copyright (c) 1987,89
  4.  
  5.              U S E R  C O N F I G U R A T I O N  U T I L I T Y
  6.  
  7.  
  8. **** Note ****
  9.  
  10. You  should  read  the  section entitled 'All about Multi-Print's Switches'
  11. contained in MPRINT40.DOC before proceeding further if you are not familiar
  12. with how Multi-Print's 'switches' work.
  13.  
  14. ***************
  15.  
  16. The  User  Configuration Utility, hereafter known as UCU, will allow you to
  17. store your most commonly used switches to a configuration file, which  will
  18. be  loaded  when  you  run  Multi-Print.  For example, lets say you use the
  19. following switches the most: MPRINT /S+ /PH+ /PP+ /DT+ README.DOC
  20.                                      ^    ^    ^    ^
  21.                                      |__ Switches __|
  22.  
  23. You  need  only  enter them once in the UCU and they, the switches, will be
  24. loaded  automatically  when  you  run  Mprint.  Let's   create   your   own
  25. configuration file by running the file CONFIGMP.EXE now.
  26.  
  27. You  will  always  know  the location of the configuration file you will be
  28. creating, or over-writing by looking at the first line inside the box which
  29. says,'Using Config File:'.  If a configuration file was found you  will  be
  30. shown  it's  location  on  this line, such as: C:\DOS\. Okay, now let's get
  31. started. The first question is:
  32.  
  33. Enable the print sensor [N] (Y or N) ?
  34.  
  35. The 'N'(No) in the box '[ ]' tells you that this is the value  Mprint  will
  36. use  right  now,  if you decided NOT to alter it. If you want Mprint to use
  37. the print sensor just type a 'Y'.  If you want to keep what it  is  set  to
  38. now  just  tap  the RETURN button. Any other answer besides an 'N' or a 'Y'
  39. will be met with a beep.
  40.  
  41. Further on you will be asked another question that requires you to enter  a
  42. number within a certain range. For example:
  43.  
  44. Set default page length to [64] (25-200) ?
  45.  
  46. At this point the UCU is asking you  for  a  number  between  25  and  200.
  47. Anything else will be rejected and you will have to re-enter your number.
  48.  
  49. There are eleven questions in all. These questions allow you to pre-set the
  50. most commonly used switches. When you finish answering all of them you will
  51. either be asked if you want to save the values you entered or over-write an
  52. existing configuration file file.
  53.  
  54. The   UCU  has   a  special  feature  which  enables  it  to  search  for a
  55. configuration file if one was not found in your current  directory.  Here's
  56. how you can do this:
  57.  
  58.  
  59.  User Configuration Utility         Page 02                Multi-Print v4.0
  60.  
  61.  
  62. Type  the following in your AUTOEXEC.BAT file which is, or will be, located
  63. in the root directory of your hard disk, or diskette.
  64.  
  65. SET PATH=DRIVE:\DIRECTORY     <- Location of MPRINT40.EXE
  66. SET MPRINT=DRIVE:\DIRECTORY   <- Location of MPCONFIG.CFG
  67.                                  Set to same location as MRINT40.EXE.
  68.  
  69. Now just re-boot your system and your all set to go  !  Place  MPRINT40.EXE
  70. and  your newly created configuration file MPCONFIG.CFG in the location you
  71. specified in 'DRIVE:\DIRECTORY'.
  72.  
  73. Now no matter where you are in your system you can run Multi-Print  and  it
  74. will  load  it's configuration file. If you are in a directory that already
  75. has a configuration file the UCU and Multi-Print will  load  it  BEFORE  it
  76. goes  out  to  search  for  the  one  in your pre-set directory above. This
  77. feature allows you to have a  seperate  configuration  file  for  different
  78. locations on your disk for different documents.
  79.  
  80. And that's it !
  81.  
  82.  
  83.  
  84.  
  85.  
  86.  
  87.